သံုးလည္းသံုးဘူးၾကမယ္လို႔ထင္ပါတယ္ သူကေတာ႔ Linuxကိုအေျခခံထားပီး
router functions ေတြအမ်ားၾကီးပါဝင္သလို firewall နဲ႔ပါတ္သတ္ feature ေတြ
ကိုလုပ္ေဆာင္နုိင္တာေတြ႔ရပါ သူမွာက web base GUI interface နဲ႔အသံုးျပဳနိုင္ပါတယ္
Ipv4/Ipv6 ကို ေထာက္ပံ႔ေပးပါတယ္။သူ႔တြက္လိုအပ္တဲ႔ sys requirements နဲ႔ features ေတြ
ကေတြ႔ေအာက္မွာ ဆက္ေလ႔လာနိုင္ပါတယ္။
Mini-sys requirements :
CPU
|
No less than 100 MHz
|
RAM
|
128 MB
|
Installation on Hard Disk
|
1 GB
|
Embedded
|
Compact Flash da 512 MB
|
လုပ္ေဆာင္နိုင္တဲ႔ feature ေတြကေတာ႔ ...
Features :
·
Firewall with
stateful packet inspection
·
Easy to use Web Based Graphical
Interface
·
Wireless Access
Point
·
Wireless Client Support (802.11
and 3G/4G with
supported devices)
·
Ability to setup and filter/isolate
multiple interfaces (LAN, DMZ, etc.)
·
Traffic Shaping (ALTQ, Limiters, 802.1p match/set, DiffServ/DSCP matching)
·
State Table controls (per-rule /
per-host limits, timers, etc.)
·
NAT (Port
Forwards, 1:1 NAT, Outbound NAT, NPt)
·
Redundancy/High
Availability - CARP+pfsync+XMLRPC Config sync allows for
hardware failover. Two or more firewalls can be configured as a failover
cluster.
·
Multi-WAN Support
·
Server Inbound Load
Balancing
·
Network diagnostic utilities such
as ping, traceroute, port tests via the GUI (more with
packages, such as nmap)
·
VPN - IPsec (including Phase 2 NAT), OpenVPN, L2TP
·
PPPoE Server
·
RRD Graphs
·
Real-time interface traffic graphs
·
Dynamic DNS
·
Captive Portal
·
DHCP Server and Relay (IPv4 and IPv6)
·
Command line shell access (Via
console and SSH)
·
Wake on LAN
·
Built in packet capture
/ sniffer
·
Ability to backup
and restore the firewall configuration via the web GUI
·
Edit files via the web GUI
·
Virtual interfaces for VLAN, LAGG/LACP, GIF, GRE, PPPoE/PPTP/L2TP/PPP WANs, QinQ, and Bridges
·
Caching DNS Forwarder/Resolver
·
Can be run in many virtualization
environments
·
Proxy
Server (using packages)
Pfsense ကို တင္ပီး အသံုးျပဳခ်င္သူေတြအတြက္ iso (64bit) ဖုိုင္ ကို
ေဒါင္းလုပ္ယူနိုင္ပါတယ္
Thanks
No comments:
Post a Comment